StaglinCenter:EEG:StartingNetStation

From Center for Cognitive Neuroscience
Jump to navigation Jump to search

Once the the net is placed on your subject and plugged into the amp, start up NetStation to get rolling on your data collection! Make sure you have blue cable labeled NetStation plugged into the Ethernet port of your stimulus computer. The directions below are for the most basic user (Electrical Geodesic) and the most basic acquisition set up.

1. Open the desktop icon EEG-TTL.
  • NetStation version 4.5.1 will start up with the most basic acquisition set up.
2. Turn the amp on by clicking On in the top right hand corner.
3. Check the Dense Waveform Display panel to ensure you are receiving real-time recordings.

Helpful Tips

  • Before unplugging the net for any reason, turn the amp Off in the top right hand corner.
  • Sometimes NetStation displays a message that it cannot find your net. Simply quit Netstation and restart the program. NetStation more easily identifies nets as it is starting up.


Return to StaglinCenter:EEG:Testing
Retrieved from "https://www.ccn.ucla.edu/wiki/index.php?title=StaglinCenter:EEG:StartingNetStation&oldid=2690"