Operation and Troubleshooting Guide In-Progress: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
=Setup= | =Setup= | ||
# Turn on power (top-right button on the back of the unit) and the display should appear | |||
# Make sure the audio cable isn't plugged into anything, touch the display twice to move to the calibration screen | |||
# During the calibration, you want absolute silence, no scanner noise, and no audio | |||
## If calibration is successful, | |||
=TroubleShooting= | =TroubleShooting= |
Revision as of 21:37, 2 August 2022
Setup
- Turn on power (top-right button on the back of the unit) and the display should appear
- Make sure the audio cable isn't plugged into anything, touch the display twice to move to the calibration screen
- During the calibration, you want absolute silence, no scanner noise, and no audio
- If calibration is successful,