Operation and Troubleshooting Guide In-Progress: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
=Setup= | =Setup= | ||
1. Turn on power (top-right button on the back of the unit) and the display should appear | *1.Turn on power (top-right button on the back of the unit) and the display should appear | ||
2. Make sure the audio cable isn't plugged into anything, touch the display twice to move to the calibration screen | *2. Make sure the audio cable isn't plugged into anything, touch the display twice to move to the calibration screen | ||
3. During the calibration, you want absolute silence, no scanner noise, and no audio | *3. During the calibration, you want absolute silence, no scanner noise, and no audio | ||
=TroubleShooting= | =TroubleShooting= |
Revision as of 21:35, 2 August 2022
Setup
- 1.Turn on power (top-right button on the back of the unit) and the display should appear
- 2. Make sure the audio cable isn't plugged into anything, touch the display twice to move to the calibration screen
- 3. During the calibration, you want absolute silence, no scanner noise, and no audio