Operation and Troubleshooting Guide In-Progress: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
=Setup= | =Setup= | ||
1. Turn on power (top-right button on the back of the unit) and the display should appear | 1. Turn on power (top-right button on the back of the unit) and the display should appear | ||
2. | 2. Make sure the audio cable isn't plugged into anything, touch the display twice to move to the calibration screen | ||
3. During the calibration, you want absolute silence, no scanner noise, and no audio | |||
i. | |||
=TroubleShooting= | =TroubleShooting= |
Revision as of 21:35, 2 August 2022
Setup
1. Turn on power (top-right button on the back of the unit) and the display should appear 2. Make sure the audio cable isn't plugged into anything, touch the display twice to move to the calibration screen 3. During the calibration, you want absolute silence, no scanner noise, and no audio i.