FIRMM: Difference between revisions
Jump to navigation
Jump to search
| Line 9: | Line 9: | ||
#Press ctrl-esc on console --> START FIRMM Session | #Press ctrl-esc on console --> START FIRMM Session | ||
#Close out of terminal and X11 on iMac | #Close out of terminal and X11 on iMac | ||
* Go to "XQuartz" or "Terminal" menu at the top left of the screen, then scroll down and click "Quit" | ** Go to "XQuartz" or "Terminal" menu at the top left of the screen, then scroll down and click "Quit" | ||
#Double click "FIRMM.command" icon on desktop, this should open up terminal | #Double click "FIRMM.command" icon on desktop, this should open up terminal | ||
#Type FIRMM into command line and press enter | #Type FIRMM into command line and press enter | ||
Revision as of 16:01, 3 August 2022
Framewise Integrated Real-time MRI Monitoring (FIRMM)
Make sure Advanced User mode is enabled - You will know it is if the MARS_SSH shortcut is visible on the start menu
FIRMM Instructions:
- Press ctrl-esc on console --> STOP FIRMM Session
- Register your participant
- Press ctrl-esc on console --> START FIRMM Session
- Close out of terminal and X11 on iMac
- Go to "XQuartz" or "Terminal" menu at the top left of the screen, then scroll down and click "Quit"
- Double click "FIRMM.command" icon on desktop, this should open up terminal
- Type FIRMM into command line and press enter
- Terminal should start spitting out lines, X11 should open up and you should see a message on the terminal window that says "waiting for dicoms..."
- Click on the Start button on the X11 FIRMM application window, start your functional scan
- Volumes should start appearing after ~45sec delay