NIRx Testing: Difference between revisions
(Created page with "==Cleaning== ===Caps=== The caps are made of a fabric netting. Though they won't get that dirty from the ultrasound gel, they may get dirty due to grease from hair, so the be...") |
(No difference)
|
Revision as of 23:35, 11 August 2014
Cleaning
Caps
The caps are made of a fabric netting. Though they won't get that dirty from the ultrasound gel, they may get dirty due to grease from hair, so the best way to clean the caps, if not too dirty, are to wipe the gromits with alcohol swabs. If dirtier, using Johnson's baby shampoo or Ivory soap with water, gently "swish" the cap to remove any dirt. Be very careful not to loose gromits in the process.
=Fiber Optic Probes
The fiber optic probe ends that come in contact with the skin may be cleaned and disinfected by wiping with diluted isopropyl alcohol 70%. Use a soft cloth or paper tissue.
Some fiber optic sets are suited for cold-gas sterilization. Please contact NIRx to confirm suitability and to obtain detailed information.
DO NOT USE ETHANOL OR METHANOL FOR CLEANING OF THE FIBER-OPTIC SURFACES. THE FIBERS ARE NOT SUITED FOR AUTOCLAVING.
Handling and Routine Maintenance
Fiber Optic Probes
The fiber optic probes are delicate optical devices. Any strain, kinking, pinching, and tight bending(bending radius < 2 cm) should be avoided because this may damage the fibers.
Before each measurement, the fibers should be visually inspected for signs of physical damage. In the case of suspected fiber damage, please contact NIRx.
NOTE: Fiber optics are considered consumables and as such are not protected by manufacturer warranty.