Hoffman2:Accessing the Cluster - Revision history

Jonathan: /* GUI-Enabled SSH */

2022-08-19T18:24:01Z

GUI-Enabled SSH

← Older revision		Revision as of 18:24, 19 August 2022
Line 22:		Line 22:
	'''For M-series Macs use the following instead with XQuartz 2.8.2:'''		'''For M-series Macs use the following instead with XQuartz 2.8.2:'''

	defaults write org.xquartz.X11 enable_iglx -bool true		defaults write org.xquartz.X11 enable_iglx -bool true

Jonathan: /* GUI-Enabled SSH */

2022-08-19T18:22:51Z

GUI-Enabled SSH

← Older revision		Revision as of 18:22, 19 August 2022
Line 20:		Line 20:
	defaults write org.macosforge.xquartz.X11 enable_iglx -bool true		defaults write org.macosforge.xquartz.X11 enable_iglx -bool true

	For M-series Macs use the following instead with XQuartz 2.8.2:		'''For M-series Macs use the following instead with XQuartz 2.8.2:'''

	defaults write org.xquartz.X11 enable_iglx -bool true		defaults write org.xquartz.X11 enable_iglx -bool true


	# Open up your Terminal. It's under ''Applications > Utilities'' on Macs.		# Open up your Terminal. It's under ''Applications > Utilities'' on Macs.

Jonathan: /* GUI-Enabled SSH */

2022-08-19T18:21:34Z

GUI-Enabled SSH

← Older revision		Revision as of 18:21, 19 August 2022
Line 19:		Line 19:
	Note: From Xquartz 2.7.9, indirect GLX is disabled by default, so you'll need to run this command followed by a reboot		Note: From Xquartz 2.7.9, indirect GLX is disabled by default, so you'll need to run this command followed by a reboot
	defaults write org.macosforge.xquartz.X11 enable_iglx -bool true		defaults write org.macosforge.xquartz.X11 enable_iglx -bool true

			For M-series Macs use the following instead with XQuartz 2.8.2:

			defaults write org.xquartz.X11 enable_iglx -bool true

	# Open up your Terminal. It's under ''Applications > Utilities'' on Macs.		# Open up your Terminal. It's under ''Applications > Utilities'' on Macs.

Jpdiaz: /* GUI-Enabled SSH */

2021-11-11T18:56:40Z

GUI-Enabled SSH

← Older revision		Revision as of 18:56, 11 November 2021
Line 18:		Line 18:
	'''Before doing the following steps, please install [http://xquartz.macosforge.org/ XQuartz] and restart your computer.'''		'''Before doing the following steps, please install [http://xquartz.macosforge.org/ XQuartz] and restart your computer.'''
	Note: From Xquartz 2.7.9, indirect GLX is disabled by default, so you'll need to run this command followed by a reboot		Note: From Xquartz 2.7.9, indirect GLX is disabled by default, so you'll need to run this command followed by a reboot
	defaults write org.macosforge.xquartz.X11 enable_iglx -bool true		defaults write org.macosforge.xquartz.X11 enable_iglx -bool true

	# Open up your Terminal. It's under ''Applications > Utilities'' on Macs.		# Open up your Terminal. It's under ''Applications > Utilities'' on Macs.

Hwang: /* GUI-Enabled SSH */

2021-05-06T17:15:03Z

GUI-Enabled SSH

← Older revision		Revision as of 17:15, 6 May 2021
Line 20:		Line 20:
	defaults write org.macosforge.xquartz.X11 enable_iglx -bool true		defaults write org.macosforge.xquartz.X11 enable_iglx -bool true

	# Open up ~~X11/XQuartz or~~ Terminal. ~~Both are~~ under ''Applications > Utilities'' on Macs.		# Open up your Terminal. It's under ''Applications > Utilities'' on Macs.
	# Type the command		# Type the command
	#: <pre>$ ssh -Y login_id@hoffman2.idre.ucla.edu</pre>		#: <pre>$ ssh -Y login_id@hoffman2.idre.ucla.edu</pre>

Hwang: /* GUI-Enabled SSH */

2021-05-06T17:13:31Z

GUI-Enabled SSH

← Older revision		Revision as of 17:13, 6 May 2021
Line 17:		Line 17:

	'''Before doing the following steps, please install [http://xquartz.macosforge.org/ XQuartz] and restart your computer.'''		'''Before doing the following steps, please install [http://xquartz.macosforge.org/ XQuartz] and restart your computer.'''
	~~For more information about XQuartz, read [http~~:~~//support~~.~~apple~~.~~com/kb/ht5293 here]~~.		Note: From Xquartz 2.7.9, indirect GLX is disabled by default, so you'll need to run this command followed by a reboot
	*WARNING* MacOSX10 Yosemite needs to add "export Display=:0.~~0" to the local user Profile in order for it to work~~.		defaults write org.macosforge.xquartz.X11 enable_iglx -bool true

	# Open up X11/XQuartz or Terminal. Both are under ''Applications > Utilities'' on Macs.		# Open up X11/XQuartz or Terminal. Both are under ''Applications > Utilities'' on Macs.
	# Type the command		# Type the command

Jpdiaz: fix broken link

2020-10-26T06:54:16Z

fix broken link

← Older revision		Revision as of 06:54, 26 October 2020
Line 13:		Line 13:


	====GUI-Enabled SSH ~~[Recommended]~~====		====GUI-Enabled SSH====
	Macs (post - Snow Leopard 10.6.x) no longer come with an X Window System Server pre-installed.		Macs (post - Snow Leopard 10.6.x) no longer come with an X Window System Server pre-installed.

	'''Before doing the following steps, please install [http://xquartz.macosforge.org/ XQuartz] and restart your computer.'''		'''Before doing the following steps, please install [http://xquartz.macosforge.org/ XQuartz] and restart your computer.'''
	For more information about XQuartz, read [http://support.apple.com/kb/ht5293 here].		For more information about XQuartz, read [http://support.apple.com/kb/ht5293 here].
	*WARNING* MacOSX10 Yosemite needs to add "export Display=:0.0" to the local user Profile in order for it to work.		*WARNING* MacOSX10 Yosemite needs to add "export Display=:0.0" to the local user Profile in order for it to work.
	# Open up X11/XQuartz or Terminal. Both are under ''Applications > Utilities'' on Macs.		# Open up X11/XQuartz or Terminal. Both are under ''Applications > Utilities'' on Macs.
	# Type the command		# Type the command
	#: <pre>$ ssh -Y ~~[USERNAME]~~@hoffman2.idre.ucla.edu</pre>		#: <pre>$ ssh -Y login_id@hoffman2.idre.ucla.edu</pre>
	#: ~~filling in~~ your Hoffman2 username.		#: replacing login_id with your Hoffman2 username.
	#: The <code>-Y</code> is for X11 Forwarding so that any graphics that are rendered on Hoffman2 get forwarded to the screen of your computer.		#: The <code>-Y</code> is for X11 Forwarding so that any graphics that are rendered on Hoffman2 get forwarded to the screen of your computer.
	# Press enter and type in your password when it asks for it. No characters or asterisks will show up while you type.		# Press enter and type in your password when it asks for it. No characters or asterisks will show up while you type.
Line 28:		Line 28:

	===Windows===		===Windows===
	# Go [~~http~~://www.hoffman2.idre.ucla.edu/~~access~~/~~login~~/ here] and follow the instructions under ''Windows''. We recommend ~~[http://www.hoffman2.idre.ucla.edu/access/putty/~~ PuTTY] or Cgywin.		# Go [https://www.hoffman2.idre.ucla.edu/Using-H2/Connecting/Connecting.html here] and follow the instructions under ''Windows''. We recommend PuTTY or Cgywin.
	#: If you use putty, please install [http://sourceforge.net/projects/xming/ xming] for GUI access.		#: If you use putty, please install [http://sourceforge.net/projects/xming/ xming] for GUI access.
	# Once you have that setup, the process is the same as if you were on a Mac or Linux/Unix machine		# Once you have that setup, the process is the same as if you were on a Mac or Linux/Unix machine


	==NX Client - GUI==		==Remote Desktop [Recommended]==
			Currently, Hoffman supports connecting to the cluster via the '''X2Go''' client and the '''NoMachine''' client.

			===NX Client - GUI===
	<!-- TODO: FIX NXClient Instructions -->		<!-- TODO: FIX NXClient Instructions -->

	The NX Client program allows you to set up a Virtual Network Computing (VNC)-like session with Hoffman2. This session will keep running even if your Internet connection drops in and out (much like [[Using Screen\|screen]] on the command line).		The NX Client program allows you to set up a Virtual Network Computing (VNC)-like session with Hoffman2. This session will keep running even if your Internet connection drops in and out (much like [[Using Screen\|screen]] on the command line).

	~~Currently, Hoffman supports connecting to the cluster via the '''X2Go''' client and the '''NoMachine''' client.~~

	<!-- Please see the [https://www.hoffman2.idre.ucla.edu/access/#Connecting_via_the_NX_protocol Hoffman2 NX Client documentation] for more information. -->		<!-- Please see the [https://www.hoffman2.idre.ucla.edu/access/#Connecting_via_the_NX_protocol Hoffman2 NX Client documentation] for more information. -->

	===X2Go - GUI===		===X2Go - GUI===
	~~x2Go~~ provides a desktop-like GUI for accessing the Hoffman server. Please see [https://www.ccn.ucla.edu/wiki/index.php/X2go here] to find out more about setup details.		X2Go provides a desktop-like GUI for accessing the Hoffman server. Please see [https://www.ccn.ucla.edu/wiki/index.php/X2go here] to find out more about setup details.

	<!--		<!--
Line 92:		Line 92:

	==External Links==		==External Links==
	*[~~http~~://www.hoffman2.idre.ucla.edu/~~access~~/ Hoffman2 Access]		*[https://www.hoffman2.idre.ucla.edu/Using-H2/Connecting/Connecting.html Hoffman2 Access]
	*[[Hoffman2:Accessing_the_Cluster-Historical_Notes \| Historical Notes]]		*[[Hoffman2:Accessing_the_Cluster-Historical_Notes \| Historical Notes]]

Jpdiaz: update nx client information

2020-06-17T23:58:30Z

update nx client information

← Older revision		Revision as of 23:58, 17 June 2020
Line 4:		Line 4:

	==SSH - Command Line==		==SSH - Command Line==
	SSH stands for ''Secure Shell'' and is a method of remotely logging into a computer using an encrypted connection. It is a command line tool and is available on most *nix-based operating systems with ports available for Windows.		SSH stands for ''Secure Shell'' and is a method of remotely logging into a computer using an encrypted connection. It is a command-line tool and is available on most *nix-based operating systems with ports available for Windows.

	===Mac/Linux/Unix===		===Mac/Linux/Unix===
Line 14:		Line 14:

	====GUI-Enabled SSH [Recommended]====		====GUI-Enabled SSH [Recommended]====
	Macs (post - Snow Leopard 10.6.x) no longer come with a X Window System Server pre-installed.		Macs (post - Snow Leopard 10.6.x) no longer come with an X Window System Server pre-installed.

	'''Before doing the following steps, please install [http://xquartz.macosforge.org/ XQuartz] and restart your computer.'''		'''Before doing the following steps, please install [http://xquartz.macosforge.org/ XQuartz] and restart your computer.'''
Line 29:		Line 29:
	===Windows===		===Windows===
	# Go [http://www.hoffman2.idre.ucla.edu/access/login/ here] and follow the instructions under ''Windows''. We recommend [http://www.hoffman2.idre.ucla.edu/access/putty/ PuTTY] or Cgywin.		# Go [http://www.hoffman2.idre.ucla.edu/access/login/ here] and follow the instructions under ''Windows''. We recommend [http://www.hoffman2.idre.ucla.edu/access/putty/ PuTTY] or Cgywin.
	(If you use putty, please install [ ~~xming~~ http://sourceforge.net/projects/xming/ ] for GUI access.		#: If you use putty, please install [http://sourceforge.net/projects/xming/ xming] for GUI access.
	# Once you have that setup, the process is the same as if you were on a Mac or Linux/Unix machine		# Once you have that setup, the process is the same as if you were on a Mac or Linux/Unix machine

	~~==X2go - GUI==~~
	~~x2Go provides a desktop like GUI for accessing Hoffman server.~~

	~~Please see [https://www.ccn.ucla.edu/wiki/index.php/X2go here] to find out more about setup details.~~

	==NX Client - GUI==		==NX Client - GUI==
Line 42:		Line 38:
	The NX Client program allows you to set up a Virtual Network Computing (VNC)-like session with Hoffman2. This session will keep running even if your Internet connection drops in and out (much like [[Using Screen\|screen]] on the command line).		The NX Client program allows you to set up a Virtual Network Computing (VNC)-like session with Hoffman2. This session will keep running even if your Internet connection drops in and out (much like [[Using Screen\|screen]] on the command line).

	Please see the [~~http~~://www.hoffman2.idre.ucla.edu/access/~~nx/~~ Hoffman2 NX Client documentation] for more information.		Currently, Hoffman supports connecting to the cluster via the '''X2Go''' client and the '''NoMachine''' client.

			<!-- Please see the [https://www.hoffman2.idre.ucla.edu/access/#Connecting_via_the_NX_protocol Hoffman2 NX Client documentation] for more information. -->

			===X2Go - GUI===
			x2Go provides a desktop-like GUI for accessing the Hoffman server. Please see [https://www.ccn.ucla.edu/wiki/index.php/X2go here] to find out more about setup details.

	<!--		<!--

Hwang: /* X2go - GUI */

2019-01-11T22:19:37Z

X2go - GUI

← Older revision		Revision as of 22:19, 11 January 2019
Line 33:		Line 33:

	==X2go - GUI==		==X2go - GUI==
	x2Go provides a desktop like GUI for accessing Hoffman		x2Go provides a desktop like GUI for accessing Hoffman server.

	Please see [https://www.ccn.ucla.edu/wiki/index.php/X2go here] to find out more about setup details.		Please see [https://www.ccn.ucla.edu/wiki/index.php/X2go here] to find out more about setup details.

Hwang: /* X2go - GUI */

2019-01-11T22:18:49Z

X2go - GUI

← Older revision		Revision as of 22:18, 11 January 2019
Line 35:		Line 35:
	x2Go provides a desktop like GUI for accessing Hoffman		x2Go provides a desktop like GUI for accessing Hoffman

	Please see [https://www.ccn.ucla.edu/wiki/index.php/X2go here] ~~setup page~~ to find out ~~the~~ setup details		Please see [https://www.ccn.ucla.edu/wiki/index.php/X2go here] to find out more about setup details.

	==NX Client - GUI==		==NX Client - GUI==